Motorcycle Riding Classes, Greensburg PA (2024)

Motorcycle Riding Classes, Greensburg PA (1)

Motorcycle Riding Classes, Greensburg PA (2)

REGISTER AT WWW.LEARNTORIDEPA.COM

Motorcycle Riding Classes, Greensburg PA (3)

Through the Pennsylvania Department of Transportation in conjunction withTotal Control Motorcyclist Training Courses, Z&M Harley-Davidson®isproud to bean official Learn to Ride PA center!

BEGINNER RIDING CLINIC

The Total Control Beginner Riding Clinic (Total Control BRC®) is designed for the novice rider with no (or limited) street-riding experience. This course includes both classroom and on-cycle instruction. You will learnfundamental skills required to operate the motorcycle and progress to street riding skills and strategies.

Topics covered include fear, understanding how motorcycles turn, proper cornering strategies, and emergency crash avoidance skills. The course is based on the most current research in rider safety and utilizes modern training methods and uses criteria set forth in the Model National Standards for Entry-Level Motorcycle Rider Training by the National Highway Traffic Safety Administration (NHSTA).

Though designed for new riders, any rider whohas not taken a motorcycle course will benefit from this clinic. Motorcycles and helmets are provided in this course. Prerequisites include the ability to ride and balance a bicycle.

Students passing the written and skill evaluation at the end of the course receive a completion card and earn their motorcycle license-waiving the on-cycle skills test at the local Driver License Center (DLC).

LEARNER'S PERMIT REQUIRED

Follow these links to obtain your learner's permit This is required before you may attend the training.

Application for a Motorcycle Learner's Permit (DL-5) (PDF) and thePennsylvaniaMotorcycle Operator's Manual(PDF).

RIDING GEAR REQUIRED

Students participating in a Pennsylvania Motorcycle Safety Program training course must wear the appropriate riding gear outlined below.

  • Helmet:Full-face and 3/4 helmets are acceptable provided they meet minimum DOT certification. Personal helmets are subject to inspection for the DOT certification and that they are in good working condition. If you do not have access to a DOT-certified, full-face or 3/4 helmet, sites will have one to borrow for the course.
  • Eye protection:Face shield, goggles, or some form of sunglasses or eyeglasses. They may be tinted or clear. Ordinary prescription glasses may be worn.
  • Full-fingered gloves:Closed-back with no holes in them. They must be street-motorcycle specific and/or durable leather. Mechanics gloves, batting gloves, etc. are NOT acceptable.
  • Pants:You must wear pants! No exceptions. Denim or leather jeans are preferred. All pants are required to have NO holes in them and must come down to the foot. Spandex or cotton leggings are NOT acceptable.
  • Shirt:Long-sleeve T-shirt or dress shirt that reaches the wrist or jacket are all acceptable.
  • Shoes/Boots:Over the ankle with little to no heel. Shoes can be an athletic or hiking shoe that provides reinforced ankle support. Boots are preferred. Your footwear should have a good rubber sole for traction and the heel shouldn't be higher than what is commonly on a "workman's boot." Thin fabric shoes made of canvas or other fabrics that do not provide support are not acceptable.
    • The classic Converse All-Star "Chuck Taylor" or dress shoes are examples of shoes that DO NOT meet the requirements.

CLASS DAY& TIMES

Classes are either Wednesday and Saturday or Thursday and Sunday. Each session is 8 hours per week for 2 weeks, a total of 16 hours.

Classroom instruction at Z&M Harley-Davidson will be conducted on Wednesday & Thursday nights from 5:00 pm - 8:00 pm. Weather permitting all instruction will be conducted outdoors. Instruction will be moved indoors during inclement weather.

Riding instruction will be conducted Saturday and Sunday. Each weekend day will have a morning and afternoon session. The morning session is scheduled for 8:00 AM - 1:00 PM. The afternoon session will be 1:30 PM - 6:30 PM. Riding Instruction will be conducted in the north side of the parking lot.

Motorcycle Riding Classes, Greensburg PA (4)

COST

The 4-day, 16-hour course is free.

CLASS REGISTRATION

Toregister for the free beginner riding clinic please visit LEARNTORIDEPA.COM and select Z&M Harley-Davidson® from thecourse location map. Walk-ups are welcome in the event a student does not showhowever, your seat is not guaranteed unless you pre-register by following the instructions above.

ABOUT Z&M HARLEY-DAVIDSON®

Weather permitting, all instruction will be conducted outdoors. Z&M provides a shaded pavilion for classroom instruction. If the weather is not conducive to outdoor instruction, the class will be held inside the dealership. Z&M closes at 7:00 PM during the week however class will continue until 8:00 PM. Restroom facilities as well as drink and snack vending machines are available in the customer lounge near the restrooms.Z&M is closed on Sundays.Portable toilets will be available outside.

Z&M Harley-Davidson® is a full-service motorcycledealership and retail center. We stock thousands of products like DOT ApprovedHelmets, Riding Gloves, Riding Jackets, Footwear, Eyewear, Clothing, Bandanas, Licensed Housewares, Wallets & Purses, Belts,and more!Our MotorClothes®experts are eager toassistyou with the proper fitment of safety equipment and riding gear!

Motorcycle Riding Classes, Greensburg PA (5)

Motorcycle Riding Classes, Greensburg PA (2024)

FAQs

How to learn to ride a motorcycle in PA? ›

Basic Rider Course (BRC)

The BRC is the starting place for a novice rider or someone that has not been through any training to learn the basic fundamentals of operating a motorcycle safely. Motorcycles are provided. This IS a licensing course.

How much is the motorcycle safety course in PA? ›

For Pennsylvania residents, the course is free. The only requirement is you must have a valid PA motorcycle license or motorcycle permit. For out of state residents, the fee is $250 for the Basic Rider Course (BRC), $150 for the Basic Rider Course 2 (BRC2), and $200 for the 3-Wheel Basic Rider Course (3WBRC).

How do you learn how to ride a motorcycle? ›

Take a Motorcycle Riding Course

The Basic RiderCourse is a 15-hour class designed for new motorcyclists of all ages and backgrounds. You will learn how to ride safely and receive the necessary safety information. The BRC comprises two portions: an in-person class and a live portion on an MSF motorcycle test course.

What is a MSA motorcycle? ›

“Motorcycle Skills Assessment” or “MSA” means a test conducted by an Assessment Officer to observe and evaluate a rider's competency in executing a series of prescribed manoeuvres on a motorcycle that is Page 3 Class 6/8 MSA Certification Agreement In effect as of March 12, 2013 Page 3 of 38 conducted to the same ...

How long are motorcycle classes in PA? ›

A typical class schedule consists of 6 hours of classroom instruction and 10 hours of riding practice. During this motorcycle riding course, you will learn fundamental skills required to operate the motorcycle and progress to street riding skills and strategies.

Can you ride a motorcycle with just a permit in PA? ›

The learner's permit allows the applicant to ride only between sunrise and sunset and, except for a rider licensed to operate another class of vehicle, only while under the instruction and supervision of an individual who holds a Class M license.

How fast can I learn motorcycle? ›

There isn't a single, definitive answer to this question, as everyone learns differently and at their own pace. Some people can learn to ride a motorcycle in a single day, others may take several days or even weeks. If you feel you may take longer or need extra lessons, that's perfectly fine.

What is a Widowmaker motorcycle? ›

1970s 2-stroke Kawasaki 500s (KH500) were called widowmakers. Some people applied that moniker to a couple of other bikes, later. Many bikes up until the early 80s had spongey frames, poor brakes and suspension, particularly (although not only) the KH500. People died riding those.

What does M1 mean in motorcycle? ›

In a nutshell, an M1 license allows motorcyclists to ride all motorcycles or motorized scooters with two wheels. An M2 license limits riding privileges for motorized bicycles, motor scooters, or mopeds.

What does AMF stand for motorcycle? ›

In the year of 1969, the AMF corporation (American Machine and Foundry) originally took over production of Harley-Davidson motorcycles. Prior to the acquisition of Harley-Davidson, AMF was a manufacturing company of bowling equipment, tennis rackets, and other recreational items.

How long does it take to get a motorcycle license in Pennsylvania? ›

Students under 18 years of age must take and successfully complete a PennDOT-approved basic riding course before the student can receive a motorcycle license. To be eligible to take the skill exam, the student must have a motorcycle's learner's permit for at least 6 months and have 65 hours of supervised riding.

How much does a motorcycle license cost in Pennsylvania? ›

Regular Driver's License Services Fees
Regular Driver's License Services FeesAmount
Initial Class M Permit, Initial Permit, Four-Year License:$63.50
Adding, Extending or Replacing Class A, B, or C Permit:$6.00
Adding, Extending or Replacing Motorcycle Permit:$12.00
Four-Year License Renewal:$39.50
21 more rows

How long does it usually take to learn how do you ride a motorcycle? ›

Learning to Ride a Motorcycle

If you can ride a little every week, you should certainly be proficient within a year, having a mastery of motorcycle handling, from speed and power to control and cornering. To accelerate your biking development, consider taking a driving course at a motorcycle safety school.

Is learning how do you ride a motorcycle hard? ›

Learning how to ride a motorcycle is much easier than most people think. Motorcycles aren't these big, complex machines requiring an expert level of skill to get started. Essentially, they're just bicycles with engines, and anyone can learn to ride.

References

Top Articles
Latest Posts
Article information

Author: Dr. Pierre Goyette

Last Updated:

Views: 5245

Rating: 5 / 5 (50 voted)

Reviews: 89% of readers found this page helpful

Author information

Name: Dr. Pierre Goyette

Birthday: 1998-01-29

Address: Apt. 611 3357 Yong Plain, West Audra, IL 70053

Phone: +5819954278378

Job: Construction Director

Hobby: Embroidery, Creative writing, Shopping, Driving, Stand-up comedy, Coffee roasting, Scrapbooking

Introduction: My name is Dr. Pierre Goyette, I am a enchanting, powerful, jolly, rich, graceful, colorful, zany person who loves writing and wants to share my knowledge and understanding with you.